OSDev.org

The Place to Start for Operating System Developers
It is currently Tue Mar 19, 2024 1:05 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 9:37 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
I have begun some further work on my current C-based OS project, specifically implementing a basic IDT populated with default ISRs. Unsurprisingly, at the moment this triple faults more or less as soon as I enable interrupts. The current code can be seen here, while the structure definitions are here.

The relevant declarations are:

Code:
#define IDT_SIZE 256
#define EXCEPTIONS_SIZE 32

enum IDT_gate_type: uint8_t   // note: requires -std=c2x for typed enum support
{
    TASK_GATE = 0x05,
    INT_GATE_16 = 0x06,
    TRAP_GATE_16 = 0x07,
    INT_GATE_32 = 0x0E,
    TRAP_GATE_32 = 0x0F
};

struct IDT_R
{
    uint16_t size;
    uint32_t base;
} __attribute__((packed));

struct Interrupt_Descriptor_32
{
    uint16_t offset_low;
    enum GDT_entry segment_selector;
    uint8_t reserved;
    struct
    {
        uint8_t gate_type:4;
        uint8_t zero:1;
        uint8_t dpl:2;
        uint8_t p:1;
    } attributes;
    uint16_t offset_high;
} __attribute__((packed));


struct Interrupt_Frame
{
    uint16_t ip;
    uint16_t cs;
    uint16_t flags;
    uint16_t sp;
    uint16_t ss;
} __attribute__((packed));


as well as
Code:
__attribute__((aligned(0x10))) static struct IDT_R idt_r;
__attribute__((aligned(0x10))) static struct Interrupt_Descriptor_32 idt[IDT_SIZE];


While the code I suspect as being at fault is in these three functions (which are partly based on the Interrupts Tutorial):

Code:
void idt_set_descriptor(uint8_t vector, void isr(struct Interrupt_Frame*), enum PRIVILEGE_LEVEL dpl, enum IDT_gate_type gate_type)
{
    struct Interrupt_Descriptor_32* descriptor = &idt[vector];

    descriptor->offset_low       = (uint16_t) ((uint32_t) isr & 0xFFFF);
    descriptor->segment_selector = system_code_entry;
    descriptor->attributes.p     = 1;
    descriptor->attributes.dpl   = dpl;
    descriptor->attributes.zero  = 0;
    descriptor->attributes.gate_type = gate_type;
    descriptor->offset_high      = (uint16_t) ((uint32_t) isr >> 16);
    descriptor->reserved         = 0;
}

__attribute__((interrupt)) void default_exception_handler(struct Interrupt_Frame* frame)
{
    disable_interrupts();
    clear_screen();
    kprints("Unhandled exception.", WHITE, BLACK, 0);
    __asm__("hlt");
}

void init_default_interrupts()
{
    // initialize the values to put into the IDT register
    idt_r.base = (uintptr_t) &idt[0];
    idt_r.size = (uint16_t) sizeof(struct Interrupt_Descriptor_32) * IDT_SIZE - 1;

    // As a precaution, populate the IDT with default ISRs.
    // This is done in two phases, first populating the exception handlers,
    // then populating the interrupt handlers.
    for (uint8_t vector = 0; vector < (EXCEPTIONS_SIZE - 1); vector++)
    {
        idt_set_descriptor(vector, default_exception_handler, RING_0, TRAP_GATE_32);
    }

    for (uint8_t vector = EXCEPTIONS_SIZE; vector < (IDT_SIZE - 1); vector++)
    {
        idt_set_descriptor(vector, default_interrupt_handler, RING_0, INT_GATE_32);
    }


    // add exception-specific handlers
    idt_set_descriptor(0x00, div_zero_exception_handler, RING_0, TRAP_GATE_32);
    idt_set_descriptor(0x08, double_fault_exception_handler, RING_0, TRAP_GATE_32);

    // add interrupt-specific handlers

    load_IDT(&idt_r);
}


Note that I deviated from the recommendations in the tutorial in that I defined the default ISR in C, using the GCC __attribute__((interrupt)) extension, rather than in assembly. I also tried breaking the attribute field of the IDT entries into separate bitfields, and while I doubt this is relevant, it is worth noting as another deviation from the tutorial's recommendations.

The output from QEMU with the -d int option set (for the section following the switch to p-mode) is as follows:
Code:
Servicing hardware INT=0x08
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x0e
Servicing hardware INT=0x08
      [... several lines repeating this ...]

    36: v=08 e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc env->regs[R_EAX]=00000000c0003070
EAX=c0003070 EBX=00040c00 ECX=0000000f EDX=0000c000
ESI=0000b482 EDI=00000004 EBP=0000ffde ESP=c00ffffc
EIP=c0000006 EFL=00000282 [--S----] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9a00 DPL=0 CS32 [-R-]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     0000b616 00000100
IDT=     fff4c000 00003010
CR0=80000011 CR2=00000000 CR3=00040000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000080 CCD=c00fffc4 CCO=EFLAGS
EFER=0000000000000000
check_exception old: 0xffffffff new 0xe
    37: v=0e e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc CR2=00000000fff4c040
EAX=c0003070 EBX=00040c00 ECX=0000000f EDX=0000c000
ESI=0000b482 EDI=00000004 EBP=0000ffde ESP=c00ffffc
EIP=c0000006 EFL=00000282 [--S----] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9a00 DPL=0 CS32 [-R-]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     0000b616 00000100
IDT=     fff4c000 00003010
CR0=80000011 CR2=fff4c040 CR3=00040000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000080 CCD=c00fffc4 CCO=EFLAGS
EFER=0000000000000000
check_exception old: 0xe new 0xe
    38: v=08 e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc env->regs[R_EAX]=00000000c0003070
EAX=c0003070 EBX=00040c00 ECX=0000000f EDX=0000c000
ESI=0000b482 EDI=00000004 EBP=0000ffde ESP=c00ffffc
EIP=c0000006 EFL=00000282 [--S----] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9a00 DPL=0 CS32 [-R-]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     0000b616 00000100
IDT=     fff4c000 00003010
CR0=80000011 CR2=fff4c070 CR3=00040000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000080 CCD=c00fffc4 CCO=EFLAGS
EFER=0000000000000000
check_exception old: 0x8 new 0xe
    39: v=03 e=0000 i=1 cpl=0 IP=0008:00000000000f35ea pc=00000000000f35ea SP=0010:0000000000000fc8 env->regs[R_EAX]=0000000000000006
EAX=00000006 EBX=00000000 ECX=00000000 EDX=00000cf9
ESI=00000000 EDI=00100000 EBP=00000000 ESP=00000fc8
EIP=000f35ea EFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=000f74a8 CCD=00008b54 CCO=CLR
EFER=0000000000000000
check_exception old: 0xffffffff new 0xd
    40: v=0d e=001a i=0 cpl=0 IP=0008:00000000000f35ea pc=00000000000f35ea SP=0010:0000000000000fc8 env->regs[R_EAX]=0000000000000006
EAX=00000006 EBX=00000000 ECX=00000000 EDX=00000cf9
ESI=00000000 EDI=00100000 EBP=00000000 ESP=00000fc8
EIP=000f35ea EFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=000f74a8 CCD=00008b54 CCO=CLR
EFER=0000000000000000
check_exception old: 0xd new 0xd
    41: v=08 e=0000 i=0 cpl=0 IP=0008:00000000000f35ea pc=00000000000f35ea SP=0010:0000000000000fc8 env->regs[R_EAX]=0000000000000006
EAX=00000006 EBX=00000000 ECX=00000000 EDX=00000cf9
ESI=00000000 EDI=00100000 EBP=00000000 ESP=00000fc8
EIP=000f35ea EFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=000f74a8 CCD=00008b54 CCO=CLR
EFER=0000000000000000
check_exception old: 0x8 new 0xd
SMM: enter
EAX=00000001 EBX=00000000 ECX=02000000 EDX=02000628
ESI=0000000b EDI=02000000 EBP=000a0000 ESP=00006c58
EIP=000ef1cd EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000080 CCD=00000001 CCO=LOGICB
EFER=0000000000000000
SMM: after RSM
EAX=00000001 EBX=00000000 ECX=02000000 EDX=02000628
ESI=0000000b EDI=02000000 EBP=000a0000 ESP=00006c58
EIP=000ef1cd EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000000 CCD=00000000 CCO=EFLAGS
EFER=0000000000000000
Servicing hardware INT=0x08
SMM: enter
EAX=000000b5 EBX=000f8743 ECX=00001234 EDX=00006cff
ESI=00006cc0 EDI=06fff5fd EBP=00006c80 ESP=00006c80
EIP=00008742 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =dd80 000dd800 ffffffff 008f9300
CS =f000 000f0000 ffffffff 008f9b00
SS =0000 00000000 ffffffff 008f9300
DS =0000 00000000 ffffffff 008f9300
FS =0000 00000000 ffffffff 008f9300
GS =0000 00000000 ffffffff 008f9300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 00000000
IDT=     00000000 000003ff
CR0=00000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000000 CCD=00006c80 CCO=EFLAGS
EFER=0000000000000000
SMM: after RSM
EAX=000000b5 EBX=000f8743 ECX=00001234 EDX=00006cff
ESI=00006cc0 EDI=06fff5fd EBP=00006c80 ESP=00006c80
EIP=000f8743 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000000 CCD=00000000 CCO=EFLAGS
EFER=0000000000000000
SMM: enter
EAX=000000b5 EBX=0000875d ECX=00005678 EDX=06feb0c0
ESI=000ecae0 EDI=06fff5fd EBP=00006c80 ESP=00006c80
EIP=000f875c EFL=00000006 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     000f7460 00000037
IDT=     000f749e 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000004 CCD=00006c6c CCO=EFLAGS
EFER=0000000000000000
SMM: after RSM
EAX=000000b5 EBX=0000875d ECX=00005678 EDX=06feb0c0
ESI=000ecae0 EDI=06fff5fd EBP=00006c80 ESP=00006c80
EIP=0000875d EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =dd80 000dd800 ffffffff 00809300
CS =f000 000f0000 ffffffff 00809b00
SS =0000 00000000 ffffffff 00809300
DS =0000 00000000 ffffffff 00809300
FS =0000 00000000 ffffffff 00809300
GS =0000 00000000 ffffffff 00809300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 00000000
IDT=     00000000 000003ff
CR0=00000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000000 CCD=00000001 CCO=EFLAGS
EFER=0000000000000000

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:05 pm 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 5069
Wrong amount of indirection here. This should work instead:

Code:
:"m"(*idtr));


Also, the CPU doesn't use the IDTR desciptor after the LIDT instruction, so it's perfectly fine to use a local variable instead of the global variable you're using now.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:15 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
Octocontrabass wrote:
Wrong amount of indirection here. This should work instead:

Code:
:"m"(*idtr));


This doesn't seem to change anything, but still, thank you for pointing that out.

Octocontrabass wrote:
Also, the CPU doesn't use the IDTR desciptor after the LIDT instruction, so it's perfectly fine to use a local variable instead of the global variable you're using now.


Ah, I didn't know that, thank you.

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:20 pm 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 5069
It should fix the garbage in the IDTR that immediately causes a page fault upon the first attempt to use the IDT:
Code:
    36: v=08 e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc
...
IDT=     fff4c000 00003010
...
check_exception old: 0xffffffff new 0xe
    37: v=0e e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc CR2=00000000fff4c040


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:42 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
OK, that does seem to be different now:
Code:
     0: v=08 e=0000 i=0 cpl=0 IP=0008:00000000c0000006 pc=00000000c0000006 SP=0010:00000000c00ffffc env->regs[R_EAX]=00000000c0003a10
EAX=c0003a10 EBX=00040c00 ECX=0000000f EDX=0000c000
ESI=0000b482 EDI=00000004 EBP=0000ffde ESP=c00ffffc
EIP=c0000006 EFL=00000282 [--S----] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
CS =0008 00000000 ffffffff 00cf9a00 DPL=0 CS32 [-R-]
SS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
DS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
FS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
GS =0010 00000000 ffffffff 00cf9300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     0000b616 00000100
IDT=     c0003010 000009ff


Which indicates to me that there is at least one more fault in the code.

I'll attach a longer dump of the -d reg output.


Attachments:
log.txt [45.97 KiB]
Downloaded 12 times

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.
Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:50 pm 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 5069
Code:
IDT=     c0003010 000009ff

Your IDT is too big. Either you have more than 256 entries or each entry is bigger than it should be.

This needs to be a uint16_t, or a type that's the same size. That would explain why it's too big.

Also, this enum defines segment indices, not segment selectors.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 10:54 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
Octocontrabass wrote:
Code:
IDT=     c0003010 000009ff

Your IDT is too big. Either you have more than 256 entries or each entry is bigger than it should be.

This needs to be a uint16_t, or a type that's the same size. That would explain why it's too big.


Ah, you are right. I'll fix that now.


Octocontrabass wrote:


D'oh! OK, I'll see to fixing that.

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 11:07 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
OK, with both of those issues addressed - in a somewhat inelegant fashion, but still - I am now trapping a double fault and halting, which indicates to me that there's still some work to be done, but at least the IDT itself is working. I was expecting that it would raise the timer interrupt and thus end up captured by the default interrupt handler, but this is enough to do for tonight. Thank you very much.

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 11:20 pm 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 5069
Schol-R-LEA wrote:
double fault [...] timer

Did you initialize the interrupt controllers? By default, they route the timer IRQ to vector 8, which will call your double fault handler.


Top
 Profile  
 
 Post subject: Re: Triple faulting after setting up IDT with default ISRs
PostPosted: Tue Jan 10, 2023 11:24 pm 
Offline
Member
Member
User avatar

Joined: Fri Oct 27, 2006 9:42 am
Posts: 1925
Location: Athens, GA, USA
No, I did not, nor did I know that it would default to vector 0x08 - I was following another codebase's exception vector descriptions, incorrectly assuming that they were the defaults. Knowing that now is actually quite a relief.

_________________
Rev. First Speaker Schol-R-LEA;2 LCF ELF JAM POEE KoR KCO PPWMTF
Ordo OS Project
Lisp programmers tend to seem very odd to outsiders, just like anyone else who has had a religious experience they can't quite explain to others.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: TYDQSoft and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group