OSDev.org

The Place to Start for Operating System Developers
It is currently Sun Sep 24, 2023 11:14 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: PCI BIOS32 SET_PCI_IRQ call fails
PostPosted: Thu Jun 08, 2023 6:24 am 
Offline

Joined: Tue May 23, 2023 4:29 am
Posts: 10
I've replaced value at addres 0xFD7B1 to 0xCC and it doesn't trigger INT3

dump of PCI bus:

Code:
{'supported': True, 'mode1': True, 'mode2': False, 'maxbus': 3}
? !!python/tuple
- 0
- 0
- 0
: bar0:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar1:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar2:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar3:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar4:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar5:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bist: 0
  cacheline: 0
  capsptr: 0
  cisptr: 0
  cisptrhex: '0x00000000'
  class: 6
  command: 7
  exprom: 0
  expromhex: '0x00000000'
  headertype: 0
  intline: 0
  intpin: 0
  latency: 0
  maxlatency: 0
  mingrant: 0
  pid: '0xc701'
  progif: 0
  revid: 50
  status: 640
  subclass: 0
  subid: 1
  subvid: 5017
  vid: '0x1045'
? !!python/tuple
- 0
- 1
- 0
: bar0:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar1:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar2:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar3:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar4:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar5:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bist: 0
  cacheline: 0
  capsptr: 0
  cisptr: 0
  cisptrhex: '0x00000000'
  class: 6
  command: 7
  exprom: 0
  expromhex: '0x00000000'
  headertype: 0
  intline: 0
  intpin: 0
  latency: 0
  maxlatency: 0
  mingrant: 0
  pid: '0xc700'
  progif: 0
  revid: 49
  status: 640
  subclass: 1
  subid: 1
  subvid: 5017
  vid: '0x1045'
? !!python/tuple
- 0
- 2
- 0
: bist: 0
  brctlr: 1920
  cacheline: 0
  cbbusn: 1
  cblat: 32
  cbsockbaseaddr: 167772160
  class: 6
  command: 7
  headertype: 130
  intline: 255
  intpin: 1
  iobaseaddr0: 0
  iobaseaddr0hex: '0x00000000'
  iobaseaddr1: 0
  iobaseaddr1hex: '0x00000000'
  iolimaddr0: 0
  iolimaddr0hex: '0x00000000'
  iolimaddr1: 0
  iolimaddr1hex: '0x00000000'
  latency: 32
  legacy16bitpcbaseaddr: 993
  membaseaddr0: 0
  membaseaddr0hex: '0x00000000'
  membaseaddr1: 0
  membaseaddr1hex: '0x00000000'
  memlimaddr0: 0
  memlimaddr0hex: '0x00000000'
  memlimaddr1: 0
  memlimaddr1hex: '0x00000000'
  offsetcapslist: 220
  pcibusn: 0
  pid: '0x0476'
  progif: 0
  revid: 2
  secstat: 512
  status: 528
  subbus: 1
  subclass: 7
  subid: 1
  subvid: 5017
  vid: '0x1180'
? !!python/tuple
- 0
- 2
- 1
: bist: 0
  brctlr: 1920
  cacheline: 0
  cbbusn: 2
  cblat: 32
  cbsockbaseaddr: 167776256
  class: 6
  command: 7
  headertype: 130
  intline: 255
  intpin: 2
  iobaseaddr0: 0
  iobaseaddr0hex: '0x00000000'
  iobaseaddr1: 0
  iobaseaddr1hex: '0x00000000'
  iolimaddr0: 0
  iolimaddr0hex: '0x00000000'
  iolimaddr1: 0
  iolimaddr1hex: '0x00000000'
  latency: 32
  legacy16bitpcbaseaddr: 993
  membaseaddr0: 0
  membaseaddr0hex: '0x00000000'
  membaseaddr1: 0
  membaseaddr1hex: '0x00000000'
  memlimaddr0: 0
  memlimaddr0hex: '0x00000000'
  memlimaddr1: 0
  memlimaddr1hex: '0x00000000'
  offsetcapslist: 220
  pcibusn: 0
  pid: '0x0476'
  progif: 0
  revid: 2
  secstat: 512
  status: 528
  subbus: 2
  subclass: 7
  subid: 1
  subvid: 5017
  vid: '0x1180'
? !!python/tuple
- 0
- 3
- 0
: bar0:
    address: 536870912
    addresshex: '0x20000000'
    prefechable: false
    type: memory
    typemem: 0
  bar1:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar2:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar3:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar4:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar5:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bist: 0
  cacheline: 0
  capsptr: 0
  cisptr: 0
  cisptrhex: '0x00000000'
  class: 3
  command: 131
  exprom: 536870912
  expromhex: '0x20000000'
  headertype: 0
  intline: 0
  intpin: 0
  latency: 0
  maxlatency: 0
  mingrant: 0
  pid: '0x00e5'
  progif: 0
  revid: 198
  status: 640
  subclass: 0
  subid: 1
  subvid: 5017
  vid: '0x102c'
? !!python/tuple
- 0
- 4
- 0
: bist: 0
  brctlr: 1920
  cacheline: 0
  cbbusn: 3
  cblat: 32
  cbsockbaseaddr: 0
  class: 6
  command: 7
  headertype: 2
  intline: 255
  intpin: 1
  iobaseaddr0: 0
  iobaseaddr0hex: '0x00000000'
  iobaseaddr1: 0
  iobaseaddr1hex: '0x00000000'
  iolimaddr0: 0
  iolimaddr0hex: '0x00000000'
  iolimaddr1: 0
  iolimaddr1hex: '0x00000000'
  latency: 32
  legacy16bitpcbaseaddr: 993
  membaseaddr0: 0
  membaseaddr0hex: '0x00000000'
  membaseaddr1: 0
  membaseaddr1hex: '0x00000000'
  memlimaddr0: 0
  memlimaddr0hex: '0x00000000'
  memlimaddr1: 0
  memlimaddr1hex: '0x00000000'
  offsetcapslist: 220
  pcibusn: 0
  pid: '0x0475'
  progif: 0
  revid: 0
  secstat: 512
  status: 528
  subbus: 3
  subclass: 7
  subid: 1
  subvid: 5017
  vid: '0x1180'
? !!python/tuple
- 0
- 5
- 0
: bar0:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar1:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar2:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar3:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar4:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar5:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bist: 0
  cacheline: 0
  capsptr: 0
  cisptr: 0
  cisptrhex: '0x00000000'
  class: 12
  command: 0
  exprom: 0
  expromhex: '0x00000000'
  headertype: 0
  intline: 255
  intpin: 1
  latency: 0
  maxlatency: 0
  mingrant: 0
  pid: '0xc861'
  progif: 16
  revid: 16
  status: 640
  subclass: 3
  subid: 1
  subvid: 5017
  vid: '0x1045'
? !!python/tuple
- 0
- 20
- 0
: bar0:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar1:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar2:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar3:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bar4:
    address: 4096
    addresshex: '0x00001000'
    type: io
  bar5:
    address: 0
    addresshex: '0x00000000'
    prefechable: false
    type: memory
    typemem: 0
  bist: 0
  cacheline: 0
  capsptr: 0
  cisptr: 0
  cisptrhex: '0x00000000'
  class: 1
  command: 5
  exprom: 0
  expromhex: '0x00000000'
  headertype: 0
  intline: 0
  intpin: 0
  latency: 0
  maxlatency: 0
  mingrant: 0
  pid: '0xd568'
  progif: 130
  revid: 48
  status: 640
  subclass: 1
  subid: 1
  subvid: 5017
  vid: '0x1045'


Top
 Profile  
 
 Post subject: Re: PCI BIOS32 SET_PCI_IRQ call fails
PostPosted: Thu Jun 08, 2023 10:20 pm 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 4844
korneliuszo wrote:
I've replaced value at addres 0xFD7B1 to 0xCC and it doesn't trigger INT3

How did you do that? The BIOS is read-only. Writes will be ignored by the chipset. Writes might not be ignored by the cache, so the BIOS might appear to be writable if you don't flush the cache between writing and reading.

korneliuszo wrote:
dump of PCI bus:

Hmm, no bridges. I really don't understand why it doesn't work.

Can you set execution breakpoints at 0xDC22, 0xDCC4, and 0xDCD0? The BIOS will hit one of those breakpoints according to the cause of the problem (0xDC22 if your parameters are out of range, 0xDCC4 if your parameters are not allowed by $PIR, or 0xDCD0 for any other reason).


Top
 Profile  
 
 Post subject: Re: PCI BIOS32 SET_PCI_IRQ call fails
PostPosted: Fri Jun 09, 2023 6:50 am 
Offline

Joined: Tue May 23, 2023 4:29 am
Posts: 10
it only breakpoints on 0xfdcc4

Code:
b'DBG!!!'
b'DR6: 0xFFFF0FF1'
b'EIP: 0x000FDCC4'
b'CS: 0x00000008'
b'EFLAGS: 0x00000046'
b'EAX: 0x00000000'
b'EBX: 0x00005EB8'
b'ECX: 0x000FDF12'
b'EDX: 0x00140010'
b'ESI: 0x000F4050'
b'EDI: 0x001478E8'
b'EBP: 0x00147910'
b'DS: 0x00000010'
b'ES: 0x00000010'
b'FS: 0x00000010'
b'GS: 0x00000010'


Top
 Profile  
 
 Post subject: Re: PCI BIOS32 SET_PCI_IRQ call fails
PostPosted: Fri Jun 09, 2023 11:57 am 
Offline
Member
Member

Joined: Mon Mar 25, 2013 7:01 pm
Posts: 4844
Thanks for that information. I found a bug in the BIOS code. It overwrites one of the parameters with an invalid value, so IRQ routing always fails.

The same bug doesn't seem to be present in the 16-bit version of this function, so you may be able to use that instead.

Windows probably used ACPI or a chipset driver. The link field in the $PIR table would tell the chipset driver which pin is connected to that PCI interrupt line. (A datasheet for this chipset is available, if you're interested...)


Top
 Profile  
 
 Post subject: Re: PCI BIOS32 SET_PCI_IRQ call fails
PostPosted: Fri Jun 09, 2023 1:17 pm 
Offline

Joined: Tue May 23, 2023 4:29 am
Posts: 10
It works with win98 setup to use BIOS calls.

I will rewrite to use 16bit call in V86 mode - it should be easy as I already have enviroment for such calls ready.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours


Who is online

Users browsing this forum: Bing [Bot] and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group